CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Reservoir Replacement
1. Drain the brake fluid completely from the reservoir.
2. Remove the modulator unit from the vehicle.
Reservoir Location
3. Remove the reservoir from the modulator unit.
4. Install the reservoir in the reverse order of removal.
5. Fill the reservoir to the MAX (upper) level with fresh brake fluid.
6. Install modulator unit.
7. Bleed system. See: Bleeding
NOTE: After installing the modulator unit and bleeding the brakes, start the engine and make sure that the ABS indicator light goes off.