CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Brake Rotor/Disc: Testing and Inspection
Front
WARNING: Never use an air hose or dry brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner to avoid breathing brake
dust.
DISC RUNOUT
Remove Pads
-
Loosen the front wheel nuts slightly, then raise the vehicle and support on safety stands. Remove the front wheels.
Front Brake Assembly
-
Remove the caliper bolt (pin A), and pivot the caliper up out of the way.
NOTE: Check the hoses and pin boots for damage and deterioration.
Pad And Shim Location
-
Remove the pad shims, pad retainers and pads.
1. Inspect the disc surface for damage or cracks. Clean the disc thoroughly and remove all rust.