CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Hydraulic Control Assembly - Antilock Brakes: Customer Interest
Brakes - Fluid Leak From the ABS Modulator
June 29, 1998
BULLETIN NO.
97-002
YEAR
1997
MODEL
2.2CL
VIN APPLICATION
Thru VIN 19UYA1...VL013969
Brake Fluid Leak From the ABS Modulator
(Supersedes 97-002, dated October 28, 1997)
SYMPTOM
Brake fluid is dripping from the left front corner of the car, and the ABS modulator is wet. If the reservoir is empty, the ABS light may also be on, and a
Code 1 stored.
PROBABLE CAUSE
The plugs in the ABS modulator assembly are not properly tightened.
CORRECTIVE ACTION
Remove, reinstall, and torque the plugs in the ABS modulator assembly.
NOTE:
Use the 1997 2.2CL Service Manual for reference when performing this procedure.
REQUIRED MATERIALS [NEW]
Brake Assembly Fluid: P/N 08798-9019
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Operation number:
413305
Flat rate time:
1.4 hours
Failed P/N:
57110-SV1-A04
Defect code:
060
Contention code:
B01
Template ID:
97-002A
Skill level:
Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Technical Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE