CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Parking Brake Lever: Adjustments
NOTE: After rear brake caliper servicing, loosen the parking brake adjusting nut,start the engine and depress the brake pedal several times to set the
self-adjusting brake before adjusting the parking brake.
WARNING: Block the front wheels before jacking up the rear of the vehicle.
1. Raise the rear wheels off the ground, and support the vehicle on safety stands.
Brake Caliper Pin
2. Make sure the parking brake arm on the rear brake caliper contacts the brake caliper pin.
3. Pull the parking brake lever up one notch.
4. Remove the rear console (see Body, Interior).
5. Tighten the adjusting nut until the parking brakes drag slightly when the rear wheels are turned.
6. Release the parking brake lever fully, and check that the parking brakes do not drag when the rear wheels are turned. Readjust if necessary.
7. Make sure that the parking brakes are fully applied with the parking brake lever is pulled up fully.
8. Reinstall the rear console.
