CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
7. Remove the camshaft holders. Measure the widest portion of Plastigage on each journal.
Clearance (New): 0.050-0.089 mm (0.0020-0.0035 in.)
Service Limit: 0.15 mm (0.006 in.)
8. If camshaft-to-holder oil clearance is out of tolerance. And the camshaft has already been replaced, you must replace the cylinder head.
-
If the camshaft has not been replaced, first check total runout with the camshaft supported on V-blocks.
Total Runout (New): 0.03 mm (0.001 in.) max.
Service Limit: 0.04 mm (0.002 in.)
-
If the total runout of the camshaft is within tolerance, replace the cylinder head.
-
If the total runout is out of tolerance, replace the camshaft and recheck. If the oil clearance is still out of tolerance, replace the cylinder head.