CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Camshaft: Service and Repair
INSTALLATION
CAUTION:
-
Make sure that all rockers are in alignment with their valves when torquing the rocker assembly bolts.
-
Valve locknuts should be loosened and adjusting screws backed off before installation.
-
To prevent the rocker arm assembly from coming apart, leave the camshaft holder bolts in the holes.
1. After wiping down the camshaft and journals in the cylinder head, lubricate both surfaces and install the camshaft.
2. Clean and install the oil control orifice with a new o-ring.
[OIL] Lubricate cam lobes after reassembly.
3. Turn the camshaft until its keyway is facing up. (No. 1 piston TDC).
4. Apply liquid gasket to the head mating surfaces of the No. 1 and No. 5 camshaft holders.
-
Apply liquid gasket to the shaded areas.
5. Set the rocker arm assembly in place and loosely install the bolts.
-
Make sure that the rocker arms are properly positioned on the valve stems.