CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Balance Shaft Belt: Service and Repair
Removal
Timing Components
NOTE:
-
Mark the direction of rotation on the belt before removing it.
-
Do not use the upper cover and lower cover for storing removed items.
-
Clean the upper cover and lower cover before installing them.
-
Replace the camshaft seals and crankshaft seals if there is oil leakage.
-
Turn the crankshaft pulley so the No. 1 piston is at top dead center (TDC) before removing the belt.
-
Inspect the water pump.
REMOVAL
1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.
2. Disconnect the battery negative terminal first, then the positive terminal.
3. Remove the wheelwell splash shield.
