CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Connecting Rod: Specifications
Standard
Limit
Bolt Torque
Standard Diameter
Each rod falls into one of four tolerance ranges, from 0
to 0.24 mm in inccreaments of 0.006 mm, depending on large
end diameter. The rods are then stamped with Number or bar
1, 2, 3, or 4 indicating the range.
0.15-0.30 mm
0.40 mm
46 Nm
51.0 mm
0.021-0.049 mm
0.06 mm
