CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Rocker Arm Assembly: Service and Repair
Disassembly/Reassembly
DISASSEMBLY/REASSEMBLY
1. Identify parts as they are removed to ensure reinstallation in the original locations.
2. Inspect rocker shafts and rocker arms.
NOTE: Rocker arms must be installed in the same positions if reused. When removing or installing the rocker arm assembly, do not remove the
camshaft holder bolts. The bolts will keep the holders, springs and rocker arms on the shaft.
NOTE: Prior to reassembling, clean all the parts in solvent, dry them and apply lubricant to any contact points.