acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Auxiliary Shaft Seal:|00-029|Page 2256 > < All Technical Service Bulletins for Auxiliary Shaft Seal:|00-029
Page 2
background image

REPAIR PROCEDURE

1.

Make sure you have the audio system anti-theft code, if needed. Write down your customer's radio station presets.

2.

Disconnect the negative cable from the battery.

3.

Remove the cylinder head cover (five nuts). Remove the upper cover (two bolts).

4.

Use a flashlight to look inside the lower cover at the front balancer shaft oil seal. Look for an oil seal retainer above it bolted to the oil pump
housing.

^

If you see an oil seal retainer, go to step 21.

^

If you do not see an oil seal retainer, go to step 5.

5.

Loosen the mounting nut and locknut for the power steering pump, and loosen the mounting bolt and locknut for the alternator. Then loosen the
adjusting bolts 20 turns (this is for reference during reassembly).

6.

Remove the power steering pump belt and the alternator belt.

All Technical Service Bulletins for Auxiliary Shaft Seal:|00-029|Page 2256 > < All Technical Service Bulletins for Auxiliary Shaft Seal:|00-029