CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
6. Install the camshaft oil seal using the special tools as shown.
7. Tighten each bolt two turns at a time in the sequence shown to ensure that the rockers do not bind on the valves.
Specified torque:
8 mm bolts: 22 Nm (2.2 kgf/m, 16 ft.lbs.)
6 mm bolts (11),(12),(13),(14): 12 Nm (1.2 kgf/m, 8.7 ft.lbs.)
8. Install the back cover.
9. Install the key and the camshaft pulley onto the camshaft, then tighten the retaining bolt to the torque shown.