CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Balance Shaft Belt: Service and Repair
Installation
INSTALLATION
Install the timing belt and balancer belt in the reverse order of removal.
Only key points are described here.
NOTE: Clean the upper and lower covers before installation. When installing only the balancer belt, go to step 13.
1. Remove the balancer belt drive pulley.
2. Set the timing belt drive pulley so that the No. 1 piston is at top dead center (TDC). Align the dimple on the tooth of the timing belt drive pulley
with the V pointer on the oil pump.
3. Set the camshaft pulley so that the ND. 1 piston is at TDC. Align the TDC mark on the camshaft pulley with the back cover upper surface.