CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Control Module HVAC: Service and Repair
Climate Control Unit Bulb Replacement
CAUTION:
-
Before replacing bulbs, discharge the static electricity (which accumulated on you when you removed the climate control unit) by touching the
door striker or other body parts.
-
Do not touch the electronic components on the printed circuit board in the climate control unit.
1. Remove the climate control unit (see previous column).
2. Carefully remove the self-tapping screws and the rear cover.
3. Remove the bulb(s) with a flat-tip screwdriver.
4. Install in the reverse order of removal. Make note of the following items.
-
Do not kink or pull on the wires between the control unit and printed circuit board.
-
After installation, operate the climate control unit to see whether it works properly.
-
Run the self-diagnosis function to confirm that there are no problems in the system.
