CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Alignment: Service and Repair
Toe-In
NOTE: Use commercially-available computerized four wheel alignment equipment to measure wheel alignment (caster, camber, toe, and/or turning
angle). Follow the equipment manufacturer's instructions.
1. Check the tire pressure.
2. Center steering wheel spokes.
3. Check the toe with the wheels pointed straight ahead. Front toe: (0 ± 2 mm / 0 ± 0.08 inch) -.08 to +.08 inch.
a. If adjustment is required, go on to step 4.
b. If no adjustment is required, remove alignment equipment.
4. Loosen the tie-rod locknuts, and turn both tie-rods in the same direction until the front wheels are in straight ahead position.
5. Turn both tie-rods equally until the toe reading on the turning radius gauge is correct.
6. After adjusting, tighten the tie-rod locknuts.
NOTE: Reposition the tie-rod boot if it is twisted or displaced.
