CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Alignment: Service and Repair
Toe-In
NOTE: Use commercially-available computerized four wheel alignment equipment to measure wheel alignment (caster, camber, toe and/or turning
angle). Follow the equipment manufacturer's instructions.
1. Release the parking brake.
NOTE:
-
Measure difference in toe measurements with the wheels pointed straight ahead.
-
If the parking brake is engaged, you may get an incorrect reading. Rear toe-in: (2 ± 2 mm / 0.08 ± 0.08 inch) 0 to +0.16 inch.
-
If adjustment is required, go to step 2.
-
If no adjustment is required, remove alignment equipment.
2. Hold the adjusting bolt on the rear lower arm B and loosen the self-locking nut.
3. Adjust the rear toe by turning the adjusting bolt until toe is correct.
4. Install the self-locking nut, and tighten it while holding the adjusting bolt.