CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
tighten the bleed screw.
Specs
Bleed Screw (Front and Rear) 9 Nm (6.5 lb.ft.)
Bleeding Sequence
5. Repeat the procedure for each wheel in sequence shown until air bubbles no longer appear in the fluid.
NOTE: Check fluid level frequently and refill as necessary to prevent air from being drawn into system.
6. Refill the master cylinder reservoir to the MAX (upper) level line.
NOTE: To flush and replace fluid, repeat procedure at each wheel until expelled fluid appears clean.