CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Attach the airbag connector to the connector holder, then reinstall the glove box.
7. Connect the battery positive cable, then connect the negative cable.
8. After installing the airbag, confirm proper system operation:
-
Turn the ignition switch ON (II); the SRS indicator light should come on for about six seconds and then go off.
-
Make sure both horn buttons work.
-
Take a test drive, and make sure the cruise control switches work.
9. Enter the anti-theft code number to restore radio operation.
