CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
NOTE: Do not mix the lower mounting nuts with the upper mounting nuts. The upper mounting nuts are not self-locking.
CAUTION: Be sure to install the SRS wiring so that it is not pinched or interfering with other parts.
5. Install the new airbag(s):
Place the driver's airbag assembly into the steering wheel, and secure it with new Torx bolts.
6. Reconnect the airbag connector(s).
Connect the driver's airbag 2P connector to the cable reel 2P connector, then install the access panel on the steering wheel.
7. Connect the battery positive cable, then connect the negative cable.
8. After installing the airbag, confirm proper system operation:
-
Turn the ignition switch ON (II); the SRS indicator light should come on for about six seconds and then go off.
-
Make sure both horn buttons work.
-
Take a test drive, and make sure the cruise control switches work.
9. Enter the anti-theft code number to restore radio operation.
