CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Clockspring Assembly / Spiral Cable: Service and Repair
Backprobing Spring-Loaded Lock Connectors
-
When checking voltage or resistance on this type of connector the first time, it is necessary to remove the retainer to insert tester probes from the
wire side.
Backprobing Spring-loaded Lock connectors
NOTE: It is not necessary to reinstall the removed retainer; the terminals will stay locked in the connector housing.
Backprobing Spring-loaded Lock connectors
-
To remove the retainer, insert a flat tip screwdriver between connector body and retainer, and carefully pry out the retainer.
NOTE: Take care not to break the connector.
