CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Seat Belt Buckle Switch: Service and Repair
Front Seat Belt Buckle
1. Remove the front seat.
Front Seat Belt Buckle
2. Driver's: Remove the cap. Remove the center cover mounting screw, detach the connector, then pull out the seat belt switch harness from the seat
linkage. Passenger's: Remove the center cover.
Centre Anchor Bolt Construction
3. With a 14 mm socket or box-end wrench, remove the center anchor bolt, then remove the seat belt buckle.
4. Installation is the reverse of the removal procedure.
NOTE: Make sure you assemble the washers and bushing on the center anchor bolt as shown.