CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Transmission Position Switch/Sensor: Service and Repair
SRS components are located in this area. Review the SRS component locations, precautions, and procedures underAir Bags before performing repairs or
service.
1. Remove the front console.
2. Disconnect the A/T gear position switch connector (12P) and the neutral switch connector (2P).
3. Remove the A/T gear position switch from the shift lever mounting bracket.
4. position the switch slider of the new A/T gear position switch to [N] position.
5. Move the shift lever to [N ]position, then install the A/T gear position switch while aligning the switch slider with the switch slider guide pin.
6. Test the A/T gear position switch.
7. Connect the connectors.