CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Starter Armature: Testing and Inspection
Armature Inspection And Test
1. Inspect the armature for wear or damage due to contact with the permanent magnet. If there is wear or damage, replace the armature.
Armature Inspection And Test
2. Check commutator surface and diameter.
If the surface is dirty or burnt, resurface with emery cloth or a lathe within the following specifications, or recondition with #500 or #600
sandpaper.
^ If commutator diameter is below the service limit, replace the armature.
Armature Inspection And Test
Commutator Diameter:
Manual Transmission
Standard (New): 29.9 - 30.0 mm
Service Limit: 29.0 mm
Automatic Transmission