CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
2. Hold the steering pump a vise with son jaws, hold the pulley with the special tool, and remove the pulley nut and pulley.
CAUTION: Be careful not to damage the pump housing with the jaws of the vise.
NOTE: Pulley nut has left-hand threads.
3. Remove the snap ring, then remove the sub-valve from the pump housing outlet port.
4. Remove the inlet joint and O-ring.
5. Remove the flow control valve cap, O-rings, spring and flow control valve.
6. Remove the inlet joint and O-ring.
7. Remove the pump cover and O-ring.
8. Remove the pump cam ring, pump rotor, pump vanes, side plate and preload spring.
9. Remove the O-rings from the side plate.
10. Remove the circlip, then remove the pump drive shaft by tapping the shaft end with the plastic hammer.
11. Remove the pump seal spacer and pump seal.
