CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Steering Gear: Service and Repair
Disassemble
TOOL REQUIRED
-
T/N CJ123-1 Puller Yoke
-
07NAD-SR3020A Cylinder End Seal Remover Attachment
-
07GAF-PH70100 Pilot Collar
-
Or Equivalent
NOTE: Before disassembling the gearbox, wash it off with solvent and a brush. Do not dip seals and O-rings in solvent.
1. Remove the steering gearbox.
2. Remove the air tube and clips.
3. Remove the tie-rod end and locknut.
4. Remove the boot bands and tie rod clips. Pull the boots away from the ends of the gearbox.
5. Unbend the lock washer.
