CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
3. Remove the wheel nuts and front wheel.
4. Raise the locking tab on the spindle nut, then remove the nut.
NOTE: Before installing the wheel, clean the mating surfaces of the brake disc and wheel.
5. Remove the brake hose mounting bolts.
6. Remove the caliper bracket mounting bolts, and hang the caliper to one side. CAUTION: To prevent accidental damage to the caliper or brake
hose, use a short piece of wire to hang the caliper from the undercarriage.
7. Remove the wheel sensor wire bracket, then remove the wheel sensor from the knuckle.
CAUTION: Do not disconnect the wheel sensor connector. Use ball joint removers to separate the ball joints from the suspension or tie-rod end.
