CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
NOTE: Align the bottom of damper spring and spring lower seat as shown.
3. Position the damper mounting base on the damper unit as shown.
4. Compress the damper spring.
5. Install the damper mounting rubber, damper mounting washer and a new 10 mm self-locking nut.
6. Hold the damper shaft, and tighten the 10 mm self locking nut.
INSTALLATION
1. Loosely install the damper on the frame with the aligning tab facing inside, then loosely install the two flange nuts.
