CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Fluid Pump: Testing and Inspection
1. Install the ATF pump gears and ATF pump driven gear shaft in the main valve body.
NOTE:
-
Lubricate all parts with ATF during inspecting.
-
Install the ATF pump driven gear with its grooved and chamfered side facing up as shown.
2. Measure the side clearance of the ATF pump drive and driven gears.
-
ATF Pump Gears Side (Radial) Clearance:
Standard (New):
-
ATF Pump Drive Gear 0.210 - 0.265 mm (0.0083 - 0.0104 inch)
-
ATF Pump Driven Gear 0.035 - 0.063 mm (0.0014 - 0.0025 inch)