CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Valve Body: Service and Repair
Torque Converter Housing/Valve Body Removal
NOTE:
-
Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air.
-
Blow out all passages.
-
When removing the valve body, replace the O-rings.
1. Remove the servo detent base (two bolts).
2. Remove the ATF strainer (two bolts).
3. Remove the ATF feed Pipes from the servo body and main valve body.
4. Remove the 4th accumulator cover (three bolts).
NOTE: The 4th accumulator cover is spring loaded. To prevent stripping the threads in the servo body, press down on the accumulator cover
while unscrewing the bolts in a crisscross pattern.
5. Remove the seven bolts securing the servo body, then remove the servo body and separator plate.
