CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
13. Inspect the outboard joint for faulty movement and wear. If any roughness or excess play is felt, replace the outboard joint.
ASSEMBLE
NOTE:
-
Clean the disassembled parts with solvent, and dry them thoroughly with compressed air. Do not wash the rubber parts with.
-
Grease: Thoroughly pack the inboard joint and both joint boots with the joint grease included in the new driveshaft set.
-
Grease quantity:
Inboard Joint 120 - 130 g (4.2 - 4.6 oz).
Outboard Joint 130 - 140 g (4.6 - 4.9 oz).