CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
thicker than standard (try the 2.32 mm (0.0913 inch) thrust shim, and recheck).
In example (B), your measurement was 0.8 Nm (7 inch lbs.) more than standard, so you need a thrust shim two sizes thinner (try the 2.11 mm
(0.0831 inch) thrust shim, and recheck).
10. After adjusting the tapered roller bearing preload, assemble the transmission and install the transmission housing.
TORQUE:
10 x 1.25 mm: 47 Nm (35 ft. lbs.)
8 x 1.25 mm: 27 Nm (20 ft. lbs.)
11. Rotate the differential assembly in both directions
to seat the tapered roller bearings.