CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Synchronizer Ring: Testing and Inspection
1. Inspect the synchro ring and gear.
A: Inspect the inside of the synchro ring for wear.
B: Inspect the synchro sleeve teeth and matching teeth
C: Inspect the synchro sleeve teeth and matching
D: Inspect the gear hub thrust surface for wear.
E: Inspect the cone surface for wear and roughness.
F: Inspect the teeth on all gears for uneven wear, scoring, galling, and cracks.
2. Coat the cone surface of the gear with oil, and place the synchro ring on the matching gear. Rotate the ring, making sure that it does not slip.
Measure the clearance between the synchro ring and gear all the way around.
NOTE: Hold the synchro ring against the gear evenly while measuring the clearance.