CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Front Door Window Regulator: Adjustments
Glass Adjustment
NOTE: Place the vehicle on a firm, level surface when adjusting the glass. Check the weatherstrips and glass run channel for damage or deterioration,
and replace them if necessary.
1. Remove door panel and plastic cover
2. Make sure the guide pin is installed in the rear channel guide properly.
3. Raise the glass.
4. Loosen the glass mounting bolts and regulator mounting bolts.
5. Push the glass rearward.
6. Tighten the glass mounting bolts and regulator mounting bolts.
7. Loosen the front channel mounting bolts.
8. Lower the glass.
9. Push the front channel against the glass, then tighten the mounting bolts.
