CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
8. Route the wire harness of the new actuator through the hole in the bracket.
9. Insert the terminals into the connector in the original arrangement (recorded in step 7), as shown.
10. Apply tape to seal the intersection of the wire harness.
11. Reassemble in the reverse order of disassembly.
NOTE: Be careful not to break the mirror when reinstalling it to the actuator.
12. Reinstall the mirror assembly to the door.
13. Operate the power mirror to check that the actuator works smoothly.