CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
OPERATION MODE TABLE
ON-BOARD DIAGNOSIS FUNCTION
The ABS control unit is connected to the 16P Data Link Connector.
The ABS can be diagnosed with the Honda PGM Tester.
The ALB Checker cannot be used with this system. For air bleeding, and checking wheel sensor signals, use the Honda PGM Tester. See the Honda
PGM Tester user's manuals for specific operating instructions.
ABS MODULATOR
The ABS modulator consists of the inlet solenoid valve, outlet solenoid valve, reservoir, pump, pump motor and the damping chamber.