CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
Rocker Arm Assembly: Service and Repair
Disassembly/Reassembly
NOTE:
-
Identify parts as they are removed to ensure reinstallation in the original locations.
-
Inspect rocker shafts and rocker arms.
-
Rocker arms must be installed in the same positions if reused.
-
When removing or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders, springs and rocker
arms on the shaft.
-
Prior to reassembling, clean all the parts in solvent, dry them and apply lubricant to any contact points.
Prior to reassembling, clean all the parts in solvent, dry them and apply lubricant to any contact points.