CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-1077006.png)
23. Install the balancer gear case to the oil pump.
NOTE: Align the groove on the pulley edge to the pointer on the gear case while holding the rear balancer with 6 x 100 mm bolt, then install the
gear case.
24. Check the alignment of the pointers after installing the gear case.
25. Clean and dry the cylinder block mating surfaces.
26. Apply liquid gasket part No. 08718 - 0001 or 08718 - 0003 evenly to the cylinder block mating surface of the oil pan and to the inner threads of
the bolt holes. Install the oil pan.
NOTE:
-
Apply liquid gasket 4 mm wide.
-
Apply liquid gasket doubly to the jointing point of the liquid gasket.
