CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-1093001.png)
Crankshaft Main Bearing: Specifications
Torque Specifications
Main Bearing Caps:
Check clearances with plastigage, then tighten the 11 mm bolts in two steps. In the first step, tighten all bolts in sequence to about 29 Nm (22 ft. lbs.):
in the final step, tighten in same sequence to 78 Nm (58 ft. lbs.).
Main Bearing Cap Bridge:
Tighten the 6 mm bolts in sequence to 12 Nm (8.7 ft. lbs.).
b
