CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
4. Remove the mounting bolts, then remove the condenser by lifting it up as shown.
NOTE: Be careful not to damage the radiator and condenser fins when removing the condenser.
5. Install in the reverse order of removal. Make note of the following items.
-
If you're installing a new condenser, add refrigerant oil (ND-OIL 8).
-
Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them.
NOTE: Be sure to use the right O-rings for HFC-134a (R-134a) to avoid leakage.
-
Be careful not to damage the radiator and condenser fins when installing the condenser.
-
Be sure to install the lower mount cushions of condenser securely into the holes.
-
Charge the system, and test its performance.