CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
10. Remove the harness clip, and disconnect the connectors from the mode control motor and the air mix control motor. Remove the mounting bolt
and the heater unit.
11. Install in the reverse order of removal. Make note of the following items.
-
Apply sealant to the grommets.
-
Do not interchange the inlet and outlet heater hoses. Make sure that the clamps are secure.
-
Refill the cooling system with engine coolant.
-
Connect the heater valve cable, and make sure that it is properly adjusted.
-
Make sure that there is no air leakage.
-
Enter the anti-theft code for the radio, then enter the customer's radio station presets.