CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2388002.png)
12. Install and tighten the retainer nuts.
13. Connect the vacuum hoses and fuel return hose to the fuel pressure regulator.
14. Install the connectors on the fuel injectors, the EGR valve and PCV valve.
15. Turn the ignition switch ON (II), but do not operate the starter. After the fuel pump runs for approximately two seconds, the fuel pressure in the
fuel line rises. Repeat this two or three times, then check whether there is any fuel leakage.
