CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2668001.png)
Shift Control Solenoid Valve: Testing and Inspection
Shift Control Solenoid Valve B/C
1. Disconnect the shift control solenoid valve B or C connector.
2. Measure the resistance between the No. 1 terminal and No. 2 terminal of the shift control solenoid valve B or C.
STANDARD: 12 - 25 ohms
3. Replace the shift control solenoid valve B or C if the resistance is out of specification.
4. If the resistance is within the standard, connect the No. 2 terminal of the shift control solenoid valve B or C connector to the battery positive
terminal, and connect the No. 1 terminal to the battery negative terminal. A clicking sound should be heard. Replace the shift control solenoid
valve B or C if no clicking sound is heard.
