CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2714001.png)
Fluid Pressure Sensor/Switch: Service and Repair
2RD Clutch Pressure Switch
1. Disconnect the connector from the 2nd clutch pressure switch.
2. Replace the 2nd clutch pressure switch, then install a new one with a new sealing washer. Tighten the switch on the metal part, not the plastic part.
3. Reconnect the connector, making sure there is no water, oil, dust, or other foreign particles inside it.
