CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-4045002.png)
4. Pull down the carpeting from both sides of the heater ducts.
5. Disconnect the SRS main harness 18P connector from the SRS unit.
6. Remove the four Torx bolts from the SRS unit, then pull out the SRS unit from the passenger's side.
CAUTION:
-
Be sure to install the SRS wiring so that it is not pinched or interfering with other parts.
-
When tightening the Torx bolts to the specified torque after replacement, be careful to turn them in so that their heads rest squarely on the
brackets.
7. Install the new SRS unit.
