CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-805001.png)
Transmission Position Switch/Sensor: Testing and Inspection
WARNING: SRS components are located in this area. Review the SRS component locations, precautions, and procedures Air Bags before
performing repairs or service.
1. Remove the front console.
2. Disconnect the A/T gear position switch connector (12P) and the neutral position switch connector (2P).
3. Check for continuity between the terminals in each switch position according to the table.
4. Move the shift lever back and forth without pushing the push button at each switch position, and check for continuity within the range of free play.
If there is no continuity within the range of free play, adjust the position of the switch.
