CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-3709004.png)
19. Apply power steering fluid to the seal ring lip of the valve oil seal, then install the seal in the valve housing using a hydraulic press and special
tools as shown.
CAUTION: Install the valve oil seal with its grooved side facing the tool.
20. Press the new roller bearing into the valve housing using a hydraulic press and special tools as shown.
NOTE: Place the roller bearing on the valve housing with the stamped letter facing up towards the valve side.
21. Apply vinyl tape to the pinion shaft, then coat the vinyl tape with power steering fluid.
22. Insert the pinion shaft into the valve housing.
CAUTION: Be careful not to damage the valve seal rings.
