CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-3756003.png)
NOTE: Align the bottom of damper spring and spring lower seat as shown.
3. Position the damper mounting base on the damper unit as shown.
4. Compress the damper spring with the spring compressor.
5. Install the damper mounting washer, and loosely install a new self-locking nut.
6. Hold the damper shaft with a hex wrench, and tighten the self-locking nut.
INSTALLATION
1. Lower the rear suspension, and position the damper with the welded nut pointed toward the front of the vehicle.
2. Loosely install the two flange nuts.
