CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2972001.png)
Shift Control Solenoid Valve: Service and Repair
Shift Control Solenoid Valve A
NOTE: Lock-up control solenoid valve/shift control solenoid valve A must be removed/replaced as an assembly.
1. Remove the mounting bolts and lock-up control solenoid valve/shift control solenoid valve A assembly.
2. Clean the mounting surface and fluid passage of the lock-up control solenoid valve/shift control solenoid valve A assembly, and install a new
lock-up control solenoid valve/shift control solenoid valve A assembly with a new filter/gasket.
3. Install the bolts with the connector bracket and the clamp bracket, and tighten the bolts.
4. Check the connector for rust, dirt or oil, then reconnect the connector securely.
