CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
Clutch Master Cylinder: Service and Repair
REMOVAL/INSTALLATION
CAUTION:
-
Do not spill brake fluid on the vehicle; it may damage the paint, if brake fluid does contact the paint, wash it off immediately with water.
-
Plug the end of the clutch line and reservoir hose with a shop towel to prevent brake fluid from coming out.
1. Remove the brake fluid from the clutch master cylinder reservoir with a syringe.
2. Disconnect the clutch line and reservoir hose from the clutch master cylinder.
3. Pry out the cotter pin, and pull the pedal pin out of the yoke. Remove the nuts.