CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
Clutch Slave Cylinder: Service and Repair
REMOVAL/INSTALLATION
CAUTION:
-
Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
-
Plug the end of the clutch line with a shop towel to prevent brake fluid from coming out.
Super High Temp Urea Grease (P/N 08798-9002).
Brake Assembly Lube or equivalent rubber grease.
1. Disconnect the clutch line from the slave cylinder.
2. Remove the slave cylinder from the clutch housing.