CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
Constant Velocity Joint: Service and Repair
DISASSEMBLY
1. Carefully clamp the driveshaft in a vise with soft jaws.
2. Remove the set ring from the inboard joint.
3. To remove the boot band, pry up the locking tabs with a screwdriver and raise the end of the band.
CAUTION: Take care not to damage the boot.
-
If the boot band is the welded type, cut it off as shown.
-
If the boot band is a double loop type, raise the band bend as shown.